Return to the BUILD
“Fit the decorative front left and right fender moldings.”
Contents
Parts
- 77A – Front Left Fender Molding
- 77B – Front Right Fender Molding
- 6x CM screws (+2 spare)
Materials: All of these parts are metal.
Build
The Front Fender Moldings
Step 01
Retrieve your Body assembly from the previous phase. Fit the three posts of the Front Left Fender Molding (marked ‘FL’) into the matching holes on the left front fender of the Main Body Shell, as shown:
Secure this Front Left Fender Molding in place from the inside with three (3) CM screws.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
Step 02
In the same way, fit the three posts of the Front Right Fender Molding (marked ‘FR’) into the matching holes on the right front fender of the Main Body Shell, as shown:
Secure this Front Right Fender Molding in place from the inside with three (3) CM screws:
Thoughts
I did not realize how much character these side moldings give the car! We will install the rear set next.
Next Up
Phase 78 – Body: Rear Fender Moldings