Return to the BUILD
“Fit the right door headliner and the right window, with its pre-fitted quarter light, hinge, and handle.”
This will feel familiar as we have done all of this before on the left door.
Contents
Parts
- 61A – Right Door Headliner
- 61B – Right Window
Materials: The Right Door Headliner is plastic, while the Right Window is plastic and SAN (Styrene-AcryloNitrile resin).
Build
The Left Door Headliner and Window
Step 01
Retrieve your Right Door from the previous phase. Fit the Right Door Headliner to the inside of the Right Door as shown, and secure it into place with two (2) CM screws.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
Step 02
NOTE: Eaglemoss recommends wearing gloves while installing these clear parts to avoid leaving fingerprints.
Fit the two tabs on the top edge of the Right Window into the matching slots on the outside of the Right Door upper window opening, then clip the two bottom tabs in to seat the window. Be sure to press on the metal door and not the fragile window:
Thoughts
With the experience of doing all this on the first door, this phase went by much quicker!
Next Up
Phase 62 – Interior: Right Door Inner Panel