PHASE 54

 Return to the BUILD


“Fit the left and right rear quarter glasses to the roof.”

After the last two phases with nothing to do, we finally get to install something!

Contents


Parts

  • 54A – Left Quarter Glass
  • 54B – Right Quarter Glass

Materials: These Quarter Glass are made of SAN (Styrene-AcryloNitrile resin).

Build


The Rear Quarter Glasses

NOTE: Eaglemoss recommends wearing gloves while installing these clear parts to avoid leaving fingerprints.

Step 01

Retrieve your Roof from Phase 52. Fit the two tabs along the top edge of the Left Quarter Glass into the matching cutouts of the left rear window opening of the Roof, as shown.

These are the two tabs along the curved top edge:

Slide these tabs through and under the matching notches of the window opening:

Then, firmly press the bottom tabs of the Left Quarter Glass into the opening to seat the window the rest of the way:

Step 02

In the same way, fit the Right Quarter Glass into the matching cutouts of the right rear window opening of the Roof, as shown:

To continue protecting this Roof assembly, I recommend putting it back in the packing clamshell:

Thoughts


This was a quick and easy phase; we just popped the rear side windows in. Both Quarter Glass have a pre-painted and chromed edge.

Next Up


Phase 55 – Body: Rear Window

Leave a Reply

Your email address will not be published. Required fields are marked *

Building the 1:8 scale Mercedes-Benz 300 SL from Eaglemoss